I'm embarrassed to admit that I purchased my K2 kit, #5534, at Hamvention in 2006 and it is still not completed. I worked on it right after the purchase and then life got in the way when I was about to do the first power on testing at the end of Part 1 assembly. I built most of the added modules first thinking I would start with the smaller, less complex boards. After I retired two years later, I picked up the kit again only to realize tremors in my hands would not allow me to do the soldering any longer. At this point I have the following for sale: Basic K2 - built to Part 1 of the assembly manual pg 42 but not tested KSB2 - built - untested K60XV - built - untested KNB2 - built - untested K160RX - built - untested KIO2 - built - untested KDSP2 - un-built still in box KAT100-2 - un-built still in box I also have the Rework Eliminators with appropriate changes made to the K2 assembly to this point. EC2 - assembled - intended to have the KAT100 and KPA100 in the EC2. The KPA100 kit is not included. Also have the KRC2 - assembled and used with my K3. I have over $2000 invested. For all the above including shopping within the continental US, I am asking $1000, but will consider reasonable offers. Contact Ken Allen at [email protected] with any questions or offers. I can supply photos of the assembled item on request.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
