Hi Palle, this won't work. TX and RX audio are reversed on the mini's USB port as it's intend is to interface to the PC and use that as a relay to the remote (as an alternative to the RRC boxes). It's a real pity it is not jumper configurable inside as this renders the USB port useless for digital remote ops.
73, Olli - DH8BQA > Am 10.05.2017 um 14:44 schrieb Palle Preben-Hansen, OZ1RH <[email protected]>: > > I have a running K3-Remote setup with Remoterig boxes, K3/0 Mini > and RRMINICBL & RRMTCBL cable sets. Everything but the USB audio to/from > the K3/0 Mini works. I have a USB cable from the K3/0 Mini to my pc at the > control site. A USB audio device is created on my Win 10 pc, but using > this USB audio device from WSJT-X version 1.7.0 the program gets no > audio. The K3 and K3/0 Mini has firmware 5.57. > > According to www.elecraft.com/K3-Remote/k3_remote.htm this should work: *The > K3/0-Mini comes with built-in USB support using the USB audio CODEC & FTDI > technology.* > > On the Remoterig Forum at www.remoterig.com/forum/index.php there are some > posts on this problem, but no solution. I have also in vain searched > www.mail-archive.com/[email protected]/maillist.html I hope the > Elecraft experts here can help. > > 73, Palle, OZ1RH > www.oz1rh.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
