Tnx Olli, If TX and RX audio are reversed on the Mini's USB port the simple solution seems to reverse TX and RX audio once more by software, either by selecting the Input as USB speakers and Output as USB microphone in WSJT or wherever software is used or if that is not possible then to use two virtual audio cables and cross them.
Any reason that two virtual audio cables in the pc at the control site can't reverse Input and Output of the USB audio devices of the K3/0-Mini? The best solution would be if the K3/0-Mini's USB port Input and Output audio could be configured (=reversed) by the Config menu of the K3/0-Mini. In that case the K3/0-Mini's USB port could be configured by the user for either Remoterig hardware or software RemoteHams.com and it would be easy to switch. 73, Palle, OZ1RH www.oz1rh.com On Thu, May 11, 2017 at 9:02 PM, Oliver Dröse <[email protected]> wrote: > Hi Palle, > > this won't work. TX and RX audio are reversed on the mini's USB port as > it's intend is to interface to the PC and use that as a relay to the remote > (as an alternative to the RRC boxes). It's a real pity it is not jumper > configurable inside as this renders the USB port useless for digital remote > ops. > > 73, Olli - DH8BQA > > > > > Am 10.05.2017 um 14:44 schrieb Palle Preben-Hansen, OZ1RH < > [email protected]>: > > > > I have a running K3-Remote setup with Remoterig boxes, K3/0 Mini > > and RRMINICBL & RRMTCBL cable sets. Everything but the USB audio to/from > > the K3/0 Mini works. I have a USB cable from the K3/0 Mini to my pc at > the > > control site. A USB audio device is created on my Win 10 pc, but using > > this USB audio device from WSJT-X version 1.7.0 the program gets no > > audio. The K3 and K3/0 Mini has firmware 5.57. > > > > According to www.elecraft.com/K3-Remote/k3_remote.htm this should work: > *The > > K3/0-Mini comes with built-in USB support using the USB audio CODEC & > FTDI > > technology.* > > > > On the Remoterig Forum at www.remoterig.com/forum/index.php there are > some > > posts on this problem, but no solution. I have also in vain searched > > www.mail-archive.com/[email protected]/maillist.html I hope the > > Elecraft experts here can help. > > > > 73, Palle, OZ1RH > > www.oz1rh.com > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
