Don, It is likely that your firmware is current.
You need firmware 1.02 for the KXB3080 option. You can easily check what is installed in your KX1 - hold any button while powering on and the firmware level will be briefly displayed. There are only 2 versions for the KX1 - 1.01 and 1.02.
If you have 1.01, then request the firmware from Elecraft - since you are adding an option which requires it, the firmware IC should be provided at no cost.
73, Don W3FPR On 5/13/2017 1:02 PM, Donnie Hill wrote:
I am about to add a 30 80 board to my KX1 which currently only has 20 and 40 meters. The serial number of my unit is 25xx. It seems from reading the Elecraft site I will not have to change the firmware chip with a serial number as late as mine. Is that correct?
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
