Thanks Don for the info? I was looking for a way to do that. I have 1.02 so I am good. I can now install the board and not worry about the firmware. 73, Don KB3DRW
> On May 13, 2017, at 1:30 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Don, > > It is likely that your firmware is current. > > You need firmware 1.02 for the KXB3080 option. You can easily check what is > installed in your KX1 - hold any button while powering on and the firmware > level will be briefly displayed. There are only 2 versions for the KX1 - > 1.01 and 1.02. > > If you have 1.01, then request the firmware from Elecraft - since you are > adding an option which requires it, the firmware IC should be provided at no > cost. > > 73, > Don W3FPR > >> On 5/13/2017 1:02 PM, Donnie Hill wrote: >> I am about to add a 30 80 board to my KX1 which currently only has 20 and 40 >> meters. The serial number of my unit is 25xx. It seems from reading the >> Elecraft site I will not have to change the firmware chip with a serial >> number as late as mine. Is that correct? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
