I use this configuration, headset with mike {Koss SB 40} and a separate
desk boom and mike {PR781} along with a pair of external speakers. It
is easy to switch between the two mikes with just a change from rP {SB
40} to fP {PR 781} via the menu. In both cases, I find mike gain
selection of HIGH to be the preferred choice. The SB 40 has a dynamic
mike element so no BIAS is needed for either mike configuration.
73
Bob, K4TAX
On 6/19/2017 1:24 AM, Bob Wilson, N6TV wrote:
Yes. Remove all Heil adapters. Connect Pro Set directly to rear panel
1/8" MIC and PHONES jacks.
Tap MENU.
Rotate VFO B knob until you see MAIN:MIC SEL.
Use MAIN:MIC SEL to select rP (rear panel) mic. by rotating VFO A knob.
Tap 1 to select Lo or Hi mic gain, whichever works best.
Tap 2 to toggle mic bias ON
Tap MENU to exit, or hold it to toggle to the CONFIG menu.
Use CONFIG:SPKR+PH to enable the PC speaker and headphones so you won't
have to reach around to the back of the K3 to unplug anything when you want
to listen with the internal or external speaker. Assign this function to
PF1 or PF2 for convenience (just hold the PF key when this menu is selected
to make the assignment).
73,
Bob, N6TV
On Jun 18, 2017 6:42 PM, "Dave Fugleberg" <[email protected]> wrote:
The Heil pro sets have a 1/8 inch stereo plug for the phones and a1/8
inch mono plug for the mic. Those will plug right into the back of the K3
without an adapter. If you prefer using the front panel mic connector,
you'll need the Heil AD-1-K adapter.
In either case, don't forget to set the menu selection for which mic (front
or rear) you want to use.
On Sun, Jun 18, 2017 at 7:55 PM mjpilgrim <[email protected]> wrote:
I am soon to be the owner of a used K3. I presently use a Heil Pro Set
Elite
boom mic for my IC-7600 and want to know if anyone here has used this mic
on
a K3, and if so, what adapter did you use to connect to the round 8-pin
mic
input on the K3? I'd like to hear your ideas. Thanks
Mike, K5MP
Boca Raton, Fl
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Using-Heil-Pro-Set-
Elite-boom-mic-on-K3-what-adapter-is-required-tp7631866.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
