There is an option for the P3 that adds an SVGA video output [plus a few
other features] which can drive a large monitor. If however, you mean
access to the internal data stream from the FFT, I don't believe it is
available.
It would be a nice featurefor remote operators. I operate W7RN remotely
from my home. When my K3 is in TERM mode controlling the remote radio,
my P3 sees the last frequency I was on locally +/- 10 KHz [I usually
leave it on 20 KHz span], usually on 80 meters from the previous night.
The K3 receiver, up to the ADC I think, is still operating in TERM mode,
and I can see signals in that range. The P3 is what I look at 99.5% of
the time and I miss it when running remote. The only option I would
have now is about 60 km of RG-58 to bring the 1st IF down to my P3. [:-))
The REALLY cool option would be an IP interface and a P3-ish display for
the control end, also with an IP interface. I fear however that,
although the number of remote operations is growing, it's still too
small a market to make something like this profitable for Elecraft.
73,
Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn
On 7/3/2017 11:53 AM, Paul Wilton wrote:
Having been playing around with the P3 for the first time, can I suggest a
future feature please. Whilst the built in display is very nice, it would be
helpful if it were possible to get the spectrum data in a PC in realtime (ish).
There are a couple of applications for this but the main one is to integrate
the waterfall/spectrum with DX spots.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
