Look for "KVM over IP" and shop a bit. Some are spendy, some not so much.
On 7/3/2017 1:53 PM, Bill Frantz wrote:
Wayne has posted about using a device which sends VGA over IP to a
remote location to display the P3 VGA display remotely. That is
off-the-shelf hardware he got from, I think, Amazon.
73 Bill AE6JV
On 7/3/17 at 1:38 PM, [email protected] (Fred Jensen) wrote:
It would be a nice featurefor remote operators. I operate W7RN
remotely from my home. When my K3 is in TERM mode controlling the
remote radio, my P3 sees the last frequency I was on locally +/- 10
KHz [I usually leave it on 20 KHz span], usually on 80 meters from the
previous night. The K3 receiver, up to the ADC I think, is still
operating in TERM mode, and I can see signals in that range. The P3
is what I look at 99.5% of the time and I miss it when running
remote. The only option I would have now is about 60 km of RG-58 to
bring the 1st IF down to my P3. [:-))
---------------------------------------------------------------------------
Bill Frantz | Re: Computer reliability, performance, and security:
408-356-8506 | The guy who *is* wearing a parachute is *not* the
www.pwpconsult.com | first to reach the ground. - Terence Kelly
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
