Thanks to everyone who answered this both private and public. To recap,
I'm using the internal 2m transverter K144XV and trying to reduce the
output on 2m below 1W whilst keeping the max of 10W. I conclude:
* the 2m internal tvtr cannot be adjusted to produce both 10W out
max and 1W out min
* this is a generic issue, not specific to my K3, and not due to
oscillation or other fault
* it would be preferable to integrate the 2m tvtr and control it by
measuring the power out as per other bands but this probably
requires a hardware change
* the issue has been around for a couple of years without resolution
* users will have to find work-arounds, probably in external circuitry
Graham
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
