FWIW, I and many others have been using the posted compiled version of
WSJT-X 1.8-rc1 from the official WSJT-X website with a K3, and without
problems. I'm not using a lot of "bells and whistles" -- I'm using a
vintage K3 with an outboard USB to serial converter from computer to
rig, a Tascam US100 USB audio interface for the computer, and VOX with
the K3 in DATA A mode. I'm doing almost no rig control -- all the USB to
serial interface is doing is read and control frequency. On the <Radio>
tab of <Settings> select the K3 under Rig, set the serial port that the
computer has assigned to your USB to serial converter, set PTT method to
VOX, set Mode to None, and set Split Operation to None.
The Tascam US100 is simply a very good vintage USB to analog stereo
audio I/O designed for home semi-pro recording studios. There's lots of
comparable stuff that works. It ONLY handles audio, no control functions.
73, Jim K9YC
On 8/3/2017 9:26 AM, Bayard Coolidge, N1HO via Elecraft wrote:
You may want to consider posting a message in the WSJT Yahoo! Groupbecause
there have been a number of issues with WSJT-X 1.8-rc1 andthe Hamlib library
which the development group has been plowing through.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
