To clarify my situation, I'm running a K3 with the new KIO3B with the integral
sound and USB interface, and it was running properly using WJST-X V1.7. The
Hamlib library problem that I encountered also affects certain Kenwood users as
well, and the development team is well aware of the issues. I have used an
external sound interface (Asus Xonar U5) in the past, but opted to simplify
things when the KIO3B became available.
73, Brandy N1HO
From: Jim Brown <[email protected]>
To: [email protected]
Sent: Thursday, August 3, 2017 2:51 PM
Subject: Re: [Elecraft] [K3S] WSJT-K 1.80rc 6m DATA A on LSB
FWIW, I and many others have been using the posted compiled version of
WSJT-X 1.8-rc1 from the official WSJT-X website with a K3, and without
problems. I'm not using a lot of "bells and whistles" -- I'm using a
vintage K3 with an outboard USB to serial converter from computer to
rig, a Tascam US100 USB audio interface for the computer, and VOX with
the K3 in DATA A mode. I'm doing almost no rig control -- all the USB to
serial interface is doing is read and control frequency. On the <Radio>
tab of <Settings> select the K3 under Rig, set the serial port that the
computer has assigned to your USB to serial converter, set PTT method to
VOX, set Mode to None, and set Split Operation to None.
The Tascam US100 is simply a very good vintage USB to analog stereo
audio I/O designed for home semi-pro recording studios. There's lots of
comparable stuff that works. It ONLY handles audio, no control functions.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
