Hello to the group. I am receiving no problem at all. I am however having difficulty in getting WSJT-X to transmit. I am using a K3s.
I have the K3s set up for Data A (USB) mode operation and have the MAIN:MIC Sel set to LINE IN. On the WSJT software Settings under the <Radio> tab I have selected the K3 under Rig, set the serial port that I normally use for CAT control (COM 5 in my case), I have set PTT method to CAT, the set Mode to None, and set Split Operation to None. Not quite sure how to change the Transmit Audio source setting as it is greyed out. It is presently set for Front / Mic. If I hit the TUNE button on the WSJT software my transceiver goes into transmit mode but there is no output at all. Any help/guidance would be greatly appreciate. Thank you in advance. 73 Serge VA3SB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
