Another K3/0-mini RR question: If I have a laptop at the control point running my logging program or N1MM+ for contesting how does it communicate with K3/0-mini if the mini is connected to the RR?
thanks jim ab3cv On Sun, Aug 13, 2017 at 8:08 PM, Jim Miller <[email protected]> wrote: > I have a K3s, P3 (and someday a KPA1500) and I'm considering a RemoteRig > and K3/Mini for remote operation. > > I realize the P3 access and KPA1500 if any will need to come from some > other source like Teamviewer or VNC. I need that for controlling the > rotator and power switching anyway. > > I'm told that RR/K3-mini performance is like "being there." > > One issue I have is the amount of disconnecting and reconnecting of cables > when switching from local operation of the K3s to setting up for remote > operation. > > Nothing I've seen in the documentation leads me to believe that this > reconfiguration of cabling for the K3s is any simpler that what is needed > for the original K3. > > For those of you who have RR and a K3s: did I miss something? Does the > cleaned up wiring on the K3s via USB for normal local operation offer any > advantages when it comes to RR configuration? > > Thanks > > jim ab3cv > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
