Jim,
You have the input attenuator in the XV144 that you can adjust if that
is a problem for you.
Take the top cover off and you will see the input attenuator pot near
the center rear quadrant.
73,
Don W3FPR
On 9/19/2017 6:04 AM, Jim Rogers wrote:
Boy, you whisper at this thing and it gets full 20W output. I was
having some problems with overshoot on CW so I re-calibrated and the
problem has gone away..... 0.20mW = 20W out on a Bird 43. 0.10mW gives
about 15W out on the Bird 43. R22 power out is barely cracked, R10 set
to indicated power. It works!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
