This doesn't give you real-time logging, but fldigi can export your QSO
info as an ADIF file which you should be able to import into Logic 9.
Better than manual ;)
73, Ross N4RP
On 10/4/2017 4:48 AM, G4pelRoss wrote:
Hello Forum.
I have two PC's "A" & "B" running on WIN 10.
I now have two Transceivers:
An Icom 7800 connected to PC "A" via a 232 port/USB serial
converter cable.
This enables my logging Program Logic 9 installed on PC "A" to read
the frequency, mode, etc from the 7800.
LOgic 9's database is on PC "A".
I have an Elecraft K3s connect to PC "B" via their USB ports, and
operate my Data modes (FlDigi)
Easypal, CW, Olivia, RTTY, ect, using PC "B".
However I have to*manually* enter all the QSO's worked on the K3s
into LOgic 9 on PC "A".
Retaining the USB link between the K3s and PC(B), I would like to
connect a link between
the K3s and LOgic9 on PC "A", to input the frequency, mode, etc from
the K3s QSO's.
I only use one radio at any one time, switching the PTT and antenna
connection's manually.
Ross (G4PEL)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n4rp.com
--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum
transmitter power necessary to carry out the desired communications.”
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com