Respectfully, is that really true? The K3 needs to be shutdown via the
Power switch due to some sort of shutdown procedure, (or internal
timings issue), within the radio?
73s and thanks,
Dave
NK7Z
http://www.nk7z.net
On 10/13/2017 11:52 AM, Bob McGraw K4TAX wrote:
I would also comment with Knut, AB2TC, that one must always turn the
radio on and off with the power switch. This allows the internal
workings to store the data. If you use a "master station switch" thus
just dump the power supply then the radio may not store the data as
required. I recall the term "power down imminent" or PDI.
Years ago we had "the big switch" which was used to shut the station
down. Today with all of the computerized gadgets, power down in
sequence is more and more of a must do.
In another brand of radio to which I am familiar, there is a CPU timing
circuit that assures the CPU is up and running before loading the
operating code. If this circuit is running too fast, it may cause a
partial load and related error. This circuit is basically a simple RC
network, and with age the C value decreases thus making the timing
circuit run too fast. i.e. not enough delay.
73
Bob, K4TAX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
