That works but WSJT i.e. can't find the KIO3B com port in my setup when
the K3 is off while powering the computer first. Although the com port
is listed in the device manager. Kinda strange... (Win7 Pro).
That happens both on my desktop and on my notebook.
73 Udo, DK5YA
Am 16.10.2017 um 15:40 schrieb Don Wilhelm:
Doug,
The computer will "exercise" the serial port lines when it goes through
its startup diagnostics.
So if you have the K3 PTT-KEY menu set to anything other than OFF-OFF,
it will key the K3 momentarily.
If you are not using the PTT-KEY function, then turn it off. If you are
using it, the only solution is to either power the computer before the
K3 or put the K3 into TX TEST before powering the computer.
73,
Don W3FPR
On 10/16/2017 9:25 AM, doug dietz wrote:
Guys
I know we have been over this before but I can't find it in the archive.
My computer keys my rig 3 or 4 times on startup. It never used to do
it so
last time this came up I didn't make a note.Sorry for the rehash but I
need
help Doug WD8Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
******************************************
Webs by DK5YA: *
http://www.mmmonvhf.de/ [editor]*
http://www.vhfdx.de/ [owner] *
http://www.palekastro.de/ [owner] *
http://www.solweb.de/ [owner] *
http://www.spessartwetter.de/ [owner] *
******************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
