Sam,
That is normal operation while the KXAT100 is tuning. See the KXPA100
manual page 25 "ATU Tuning".
The power is limited to 25 watts while the ATU is tuning and the 25/SWR
LED under POWER OUT blinks.
Note that ATU is different than TUNE - see page 19 in the KX2 manual.
73,
Don W3FPR
On 10/26/2017 5:45 PM, SAMUEL L ROWE wrote:
Is anyone running a Elecraft KXPA100 amp with KXAT100 with a KX2 or KX3 that
could help me with a little troubleshooting?
The power amp light blinks slowly (not on steady) and while turner tunes, the
amp will not go to transmit but shows 25 W output. I am using the
KX2-controled connection.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
