Thanks Don I knew it had to be something simple that I missed.
73 Sam KG9NG ________________________________ From: Don Wilhelm <[email protected]> Sent: Thursday, October 26, 2017 5:45 PM To: SAMUEL L ROWE; [email protected] Subject: Re: [Elecraft] KXPA100 not transmitting Sam, That is normal operation while the KXAT100 is tuning. See the KXPA100 manual page 25 "ATU Tuning". The power is limited to 25 watts while the ATU is tuning and the 25/SWR LED under POWER OUT blinks. Note that ATU is different than TUNE - see page 19 in the KX2 manual. 73, Don W3FPR On 10/26/2017 5:45 PM, SAMUEL L ROWE wrote: > Is anyone running a Elecraft KXPA100 amp with KXAT100 with a KX2 or KX3 that > could help me with a little troubleshooting? > > The power amp light blinks slowly (not on steady) and while turner tunes, the > amp will not go to transmit but shows 25 W output. I am using the > KX2-controled connection. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
