Hi,
The problem appears to be blown relays for the 20m LPF in the KXPA100.
73 Tom
va2fsq.com
-----Original Message-----
From: Don Wilhelm
Sent: Friday, October 27, 2017 5:48 PM
To: Tom ; Elecraft
Subject: Re: [Elecraft] Did I fry my KXPA100?
Tom,
I certainly don't know what the problem may be, but someone in support
may be able to help you.
73,
Don W3FPR
On 10/27/2017 4:56 PM, Tom wrote:
Hi,
No, I didn't.
However, it seems that the amp is not blown.
I have no idea what's happening...
Ok, Elecraft recommended a TX Gain calibration. That was successful
on all bands.
I changed all the RF cables and the KXPA100 still shows no output...
However, this was on 20m.
If I switch bands, the KPXA100 is working fine on all other bands. It
just so happens that this seems to happen only on 20m.
Everything looks the same as far as I can tell, same antenna (all
testing is into a dummy load)
So it is only on 20m.
What have I missed?
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
