I will add that my receptacle is 5 ft from the panel. And the only other things on this circuit are the light in the Keurig, microwave clock and LCD on the HP laser.
Sent from my iPhone ...nr4c. bill > On Oct 30, 2017, at 12:01 PM, Nr4c <[email protected]> wrote: > > Mine works very well on 110 volts. I use a 15A circuit and it powers the > Elecraft 30 Watt PS and the amp. > > Sent from my iPhone > ...nr4c. bill > > >> On Oct 29, 2017, at 10:23 PM, Robert G Strickland <[email protected]> wrote: >> >> What's the conventional wisdom on running the KPA500 on 110v? At my previous >> QTH I had 220v, so never had to face this issue. In my new QTH there's no >> 220v -yet. The operating environment is 100% cw with occasional contests. >> Thanks for all opinions in advance. >> >> ...robert >> -- >> Robert G Strickland, PhD ABPH - KE2WY >> [email protected] >> Syracuse, New York, USA >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
