On Thursday 20 April 2006 06:05 pm, you wrote: > Do you have the jumper installed in the jack next to the BNC? >
Yes, the jumper is in place. That's not where I looe the RX signal. It's at L6. Also, the TX puts out normal power into a dummy load, so it looks like the low pass filter part pf the KXB3080 is OK. > The markings on the BACK of the board are wrong. The ones shown in > the manual on page 9 are okay. > That's strange, becaue I had the KXB30 option, and its manual doesn't mention that the markings on the back of the KX1 board are wrong. A goes to A and B to B, when installing the KXB30. Thanks, Randy. Back to troubleshooting... 73, Bruce N7CEE _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
