What mode and frequency on VFO B AND VFO A when this occurs? Sent from my iPhone ...nr4c. bill
> On Nov 16, 2017, at 3:50 AM, Michael Eberle <[email protected]> wrote: > > Was this issue ever resolved? I have noticed the same thing with mine > although the issue does not appear to be the tuner itself, but the K3 is not > transmitting any power so the tuner has nothing to work with. I am running > FW version 5.60 an have this issue but only on 6 Meters. > > I can power up the K3 and open WSJT-X on my computer and select 6 meters > which usually causes SPLIT to turn on. Hold TUNE and the TX keys and the > display shows 0 power. Turn off SPLIT and it puts out power as usual. Then > if I turn SPLIT back on, it will then output a carrier as usual. > > If SPLIT is enabled on 6 meters and you run a TX gain calibration, it will > fail the calibration because the TX puts out no power. > > It's not a major issue but an annoyance since I tend to forget about it > every time I switch from HF to 6 and try to check my antenna tuning. > > Thanks, > Mike, KI0HA > > > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
