Yes, that is the idea. There are already some SDR’s that will do this, without the need for a PC. Here is an example http://www.rfspace.com/RFSPACE/SDR-IP.html
Of course if you want to do this yourself, it depends where you want to start... 73 From: Jim Miller Sent: Monday, November 20, 2017 4:21 PM To: Tom Cc: Elecraft Subject: Re: [Elecraft] Digitized IF over IP? Although the IF frequency is 8.215Mhz the bandwidth at that frequency can't be that much. Wouldn't down converting or sampling then down before down converting yield a much more reasonable data stream? As you suggest further processing before sending over IP to something that can be reasonably displayed would make sense as well. My desire is to not have a PC at the remote station. Something embedded is fine. 73 jim ab3cv --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
