Thanks to all. I also confirmed this experimentally. However, even turning decode off on the rig, I still get spurious dropped characters from the utility.
It's not a showstopper to me because (a) I'm not looking to bring the computer along on field expeditions, and (b) I'm hoping at some near point in the future to use the CW decoder that is between my ears. Hi hi. --- 72, Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* On Sun, Nov 26, 2017 at 7:58 PM, Cady, Fred <[email protected]> wrote: > You must have the KX3 decoding to display text on the PX3. The PX3 > doesn't decode. What you shouldn't do is try to display on the PX3 and the > KX3 Utility at the same time. > > > *Note:* To display CW, RTTY or PSK decoded signals on the PX3, you must > activate text decoding on the KX3. > > Make sure that you do not have the KX3 Utility Terminal program active to > display and send text while you are trying to use the PX3 keyboard, or vice > verse. The KX3’s text decode can be fed to only one place. You will see > dropped characters if the utility is active when using the keyboard. They > both cannot be used at the same time. > > > Cheers, > > Fred KE7X > > > For info on all KE7X books, see www.ke7x.com > > > > ------------------------------ > *From:* [email protected] <[email protected]> > on behalf of rich hurd WC3T <[email protected]> > *Sent:* Sunday, November 26, 2017 5:26 PM > *To:* tomb18 > *Cc:* [email protected]; MaverickNH > *Subject:* [Elecraft] KX3 CW Decode question > > Hi Tom (or anyone else who knows), > > Does this also hold true for the decode function in the KX3 and the PX3? > Should I not run those simultaneously either? Or is it only the > interaction between the hardware and the utility program? > > On Sat, Nov 25, 2017 at 15:17 tomb18 <[email protected]> wrote: > > > HiActually what is happening is that both the p3 svga and the utility are > > attempting to get access to the decoded text at the same time so when > one > > gets a character, the other misses it.. If you wish to use the utility, > > just turn off text decoding display on the svga. 73 Tom > > > > > > Sent from my Samsung Galaxy smartphone. > > -------- Original message --------From: MaverickNH < > [email protected]> > > Date: 2017-11-25 2:31 PM (GMT-05:00) To: [email protected] > > Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle > > I have always had problems using the K3 Utility to change configurations > > from > > another mode to CW, as I could see text decode on the K3S VFO B display > > area > > after a restore to my CW configuration but not on the P3-SVGA external > > display without a lot of fiddling. I see now that simply turning the P3 > > on/off is required after a configuration restore to get that text decode > to > > display. > > > > I would make a note of that but would just forget where I put it. Now, > it's > > right here for me to find! > > > > Bret/N4SRN > > > > > > > > -- > > Sent from: http://elecraft.365791.n2.nabble.com/ > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] <[email protected]> > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] <[email protected]> > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > -- > --- > 72, > Rich Hurd / WC3T / DMR: 3142737 > PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer > for Scouting > Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: > *FN20is* > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] <[email protected]> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
