Hi Alan, I am also a new K3S owner/assembler. I had the same symptoms after powering up the K3S the first time, no errors (that later resolved itself and I received the KPA3A alert after clearing with Display button and power cycling several times during Filter Configuration - have 2.8kHz, FM & 400hz). I have also been puzzled by not hearing any signals at this point on any band, just the noise. However, during the troubleshooting of the Wattmeter calibration I listened and transmitted with an old Ten Tec Omni D, I did hear the Omni transmit on the K3S receive and visa versa while transmitting during the K3S Wattmeter Calibration. Get a good night's rest and we will press on later!
Tom NB5Q -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
