HiIf you connect an sdrplay to the if output you can see over 2mhz bandwidth. 73 Tom
Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Don Wilhelm <donw...@embarqmail.com> Date: 2017-12-25 12:31 PM (GMT-05:00) To: Jim Miller <jtmille...@gmail.com>, Elecraft@mailman.qth.net Subject: Re: [Elecraft] K3s IF bandwidth? Jim, The IF takeoff point in the K3 is right after the 8.215mHz mixer, so at that point, it has a very wide bandwidth. The K3 filtering is after that IF takeoff point, so any filtering in the K3 will not affect that bandwidth. I don't know how much wider than 200kHz the IF takeoff might be. 200kHz is a substantial portion of any band. 73, Don W3FPR On 12/25/2017 12:17 PM, Jim Miller wrote: > The P3 displays a maximum of 200khz. Is that the maximum useful K3 IF > bandwidth or is it wider? > > 73 > > Jim ab3cv > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to donw...@embarqmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com