I have the Astron SS30M which I find to be electrically quiet, excellent
regulation. The fan does cycle on and off from time to time and that is
noticeable. I power 3 radios, not at the same time, from this
supply. Originally it has the Pos and Neg connections where you insert
the wire and tighten the screw on the side. I too 2 brass, 10-32
screws, 1 1/2" long, cut off the heads, filed a small flat spot on the
side at one end, inserted one of these in the connectors and tighten the
screws. Now I have two studs to which I can place several ring
terminals and secure with a wing nut. From these I have the power
for 3 radios, SWR/Pwr meter, antenna tuner all attached. I did add a
dedicated ground terminal to the rear of the supply. This is the
common point for all of the station equipment ground bonding.
73
Bob, K4TAX
On 1/1/2018 11:56 PM, John_N1JM wrote:
I need a new power supply for my K3s or my other 13V 20 amp transceivers. Is
this one a good choice? Works well? Minimal RF hash?
73, John N1JM
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
