Tony, It sounds like the software is operating correctly.
On the spots that you clicked on and the K3 went into Split mode, were the spotted stations actually operating split? This can also happen if the spotting station is in split mode when the spot is sent to packet. You can prove this to yourself. Type a call into the call sign field of the Entry window. Put the K3 in split mode with the sub vfo a kHz or two away. Now just tune the main vfo away and watch the self-spot go into the bandmap. Take the K3 out of split mode. Use Ctrl+Up or Dn arrow and jump back to that spot. The K3 will go back into Split mode with the same offset as when you spotted it. Similarly, if the radio is in the split mode and you click on a non-split spot, it will cancel the split on the radio. HTH. 73, Ted W4NZ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of N2TK, Tony Sent: Tuesday, February 20, 2018 1:20 PM To: 'Elecraft Reflector' Subject: [Elecraft] K3 with N1MM - SPLIT mode Had a weird problem that I had not seen before this past weekend Was using the K3 with N1MM+. About a quarter of the time when I clicked on a callout in the N1MM+ Bandmap the K3 would go into SPLIT mode. Anyone else see something like this? Not sure if this is a unique condition I am seeing. The N1MM+ folks say they have not heard of such an issue. Tnx for any feedback N2TK, Tony ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
