TP, tune poll. 73 de Dick, K6KR
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Thursday, March 1, 2018 15:16 To: Harlan Sherriff <[email protected]>; Elecraft Email <[email protected]> Subject: Re: [Elecraft] KAT500 commands Harlan, I don't believe that is available on a real time basis (which is what you apparently are seeking). Yes, the K3 knows when the KAT500 has stopped tuning, but it is not available as a GET command. 73, Don W3FPR On 3/1/2018 6:02 PM, Harlan Sherriff via Elecraft wrote: > Is there a GET command for either the K3 or KAT500 that will show when the tuner has completed a tune? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
