I fail to see the need for a hundred steps between 0.1W and 10W on my KX2, or steps between 1W and 100W on another radio. What difference is it going to make to anybody whether you're at 71 vs. 74 watts? But a 1.5_dB or a 3_dB step? That's something I can use.
On 3/1/18 14:37 PM, Wes Stewart wrote: > I fail to see the need, but if I had one I would just do in my head. > (and probably use dBW :-) > > Wes N7WS > > On 3/1/2018 1:07 PM, Steve Sergeant wrote: >> Here's a suggestion across the line, from the KX2 to the K3S: >> >> I'd like to have the option to display and set transmit power in dBm >> rather than linear watts. Conceptually, it makes more sense to me, and >> it's a more meaningful number relating to S-units on the received side. >> >> --... ...-- >> SteveSgt, KC6ZKT >> ______________________________________________________________ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] -- -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- Steve Sergeant Internet: [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
