It makes a big difference if you are driving an amplifier, where the
precise amount of drive can be important.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/
On 2 Mar 2018 01:46, Steve Sergeant wrote:
I fail to see the need for a hundred steps between 0.1W and 10W on my
KX2, or steps between 1W and 100W on another radio. What difference is
it going to make to anybody whether you're at 71 vs. 74 watts? But a
1.5_dB or a 3_dB step? That's something I can use.
On 3/1/18 14:37 PM, Wes Stewart wrote:
I fail to see the need, but if I had one I would just do in my head.
(and probably use dBW :-)
Wes N7WS
On 3/1/2018 1:07 PM, Steve Sergeant wrote:
Here's a suggestion across the line, from the KX2 to the K3S:
I'd like to have the option to display and set transmit power in dBm
rather than linear watts. Conceptually, it makes more sense to me, and
it's a more meaningful number relating to S-units on the received side.
--... ...--
SteveSgt, KC6ZKT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
