Chuck,

It is the right address for the Elecraft Email Reflector.

Are you using DATA A mode?  If not you should be.
Do you have audio sufficient to drive the ALC meter up to 4 bars solid with the 5th bar flashing?

For more details go to my website www.w3fpr.com and scroll down to the last article in the left column - click for the link.

73,
Don W3FPR

On 3/6/2018 4:38 PM, Chuck Jones via Elecraft wrote:
GD,

Hope this is right Email address.

I apparently have something set wrong on my K3 for PSK31.

Am using HRD & microKEYER (interfact)

Have no problem RX'ing

TX'ing seems to output as see TX on water fall and on Watt Meter
however people locally don't see anything from me.

K3 is in PSK31 mode.

Obviously something is off, but it has been so long since I setup/used
PSK31 I am lost.

73, Chuck N7BV


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to