There are K3 schematics at http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf <http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf>
Some of the modules in this package are a bit out of date (later than 2010), so the K3S docs may be needed, too, depending … Grant NQ5T K3 #2091, KX3 #8342 On Mar 8, 2018, at 10:57 AM, Don Wilhelm <[email protected]> wrote: > > Shel, > > It seems the K3 schematics have disappeared from the Elecraft website, but > the K3S schematics are listed - and should be adequate for that problem. > > I do have the K3 schematics, and if that will help, send me a private email > (take Elecraft out of the subject line) and I can send the file to you - The > reflector does not allow attachments. > > 73, > Don W3FPR > > On 3/8/2018 8:36 AM, Shel Sherman wrote: >> I cannot get the key out port to pull to ground using the internal keyer I >> have no gate signal change when pulsing the keyer I cannot find the >> schematic so I can trace back to the keyer outlying order to find the break >> help appreciated call 314/580/3566 > ______________________________________________________________ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
