The K3 schematics are on the web site:
http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
73,
... Joe, W4TV
On 3/8/2018 10:57 AM, Don Wilhelm wrote:
Shel,
It seems the K3 schematics have disappeared from the Elecraft website,
but the K3S schematics are listed - and should be adequate for that
problem.
I do have the K3 schematics, and if that will help, send me a private
email (take Elecraft out of the subject line) and I can send the file to
you - The reflector does not allow attachments.
73,
Don W3FPR
On 3/8/2018 8:36 AM, Shel Sherman wrote:
I cannot get the key out port to pull to ground using the internal
keyer I
have no gate signal change when pulsing the keyer I cannot find the
schematic so I can trace back to the keyer outlying order to find the
break
help appreciated call 314/580/3566
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
