On Fri, Mar 16, 2018 at 11:47 AM, Wes Stewart <[email protected]> wrote:
> I've never understood why a three-dimensional object is called "2D".
Presumably because they *fasten* in two dimensions (there are no
threaded holes in the ends of the blocks).
73,
~iain / N6ML
> On 3/16/2018 11:41 AM, EricJ wrote:
>>
>> I bet they're proprietary to Elecraft, but I don't know that for sure.
>> Easy to make if you have a drill press, hacksaw and 4-40 drill and tap. Hard
>> to make without. If you make them, observe and measure very carefully. The
>> holes are not centered on the block. They're offset ~1 mm from centerline. I
>> forget exact dimensions. Be exact.
>>
>> Eric KE6US
>>
>>
>> On 3/16/2018 11:12 AM, G4GNX wrote:
>>>
>>> Does anyone know where I can buy a small quantity of the 2D Fasteners
>>> that hold Elecraft cases together? These are the aluminum blocks with 2
>>> threaded holes on one pair of sides and 1 threaded hole in the other pair of
>>> sides.
>>>
>>> Is there an alternative name for them? I tried Google and came up with
>>> nothing.
>>>
>>> 73,
>>>
>>> Alan. G4GNX
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
