The best and easiest way to remove the front panel pins is to cut the
plastic strip on the pins into small enough pieces so you can pull the
strip off the pins - then remove the pins one at a time. Clean up with
solder wick, and if solder remains in the holes, heat the solder pad and
push it out with a wooden toothpick or a stainless steel needle.
73,
Don W3FPR
On 3/22/2018 2:36 PM, GRANT YOUNGMAN wrote:
The connectors are not difficult to replace.
I know that some folks have had issues.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
