The real question is the name of the right fielder?
Kevin. KD5ONS
On 03/29/2018 05:11 PM, Don Wilhelm wrote:
Bill,
If you have updated the K3 firmware in the last few months, it does
not make any difference whether the K3 or the computer is turned on
first.
The K3 now has a SAFE mode that disables DTR and RTS until it receives
some command like polling for frequency, mode, etc. from your software
application.
You can go into the K3 CONFIG menu for KEY-PTT and turn it to unsafe
if you have devices that monitor the RS-232 bus and do not issue any
commands (SteppIR controllers for one instance).
Look at the firmware release notes for the past 3 months.
BTW, the firmware release notes should be considered an addition to
your K3/K3S manual. Do not overlook them.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
