> I need both at the same time, Mike for voice and Line in for digital.
This is absolutely a terrible idea. I doubt that your shack is silent while working data modes and any noise - you talking, someone else yelling at your, a TV/radio/computer running in the background, or even fan noise will be picked up by the open mic. That said ...
Does any one know the command for both Mike in Front Panel and Line in rear panel?
Assuming you will be using USB *with CMP set to zero*, set MENU:MIC SEL as needed for your mic and MENU:MIC+LIN = ON. Note: you will first need to set MENU:MIC SEL=LINE and adjust the mic gain/sound card output for four to five bars of ALC. This sets the Line IN gain. Then switch to MENU:MIC SEL as needed for your mic (FP.h or FP.L) and again adjust the mic gain for ALC peaking between 5 to 7 bars. Now you can select MENU:MIC+LINE and set it to ON to enable both inputs. Adjusting the mic gain with MENU:MIC+LINE = ON will adjust *ONLY* the mic gain for the *MICROPHONE* input, in order to change the Line In (digital) level, you will need to adjust the sound card output *or* change MENU:MIC SEL to LINE before adjusting the mic gain. 73, ... Joe, W4TV On 3/30/2018 2:09 PM, Ralph S. Turk wrote:
Does any one know the command for both Mike in Front Panel and Line in rear panel? I need both at the same time, Mike for voice and Line in for digital. Ralph, W7HSG/AFA9RT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
