Harlan,
There are enough to store data for each band segment in the 160m thru 6m
bands. Page 15 of the KAT500 manual shows the width of each band segments:
Below 3 MHz the segments are 10 kHz wide.
From 3 MHz through 26 MHz the segments are 20 kHz wide.
From 26 MHz to 38 MHz the segments are 100 kHz wide.
From 38 MHz to 60 MHz the segments are 200 kHz wide.
You are not likely to run out of memories.
73,
Don W3FPR
On 4/24/2018 3:07 PM, Harlan Sherriff via Elecraft wrote:
I understand the tuner holds tune data in memories for quicker tuning when
changing frequencies, and it stores separate data for each antenna port. My
question is, how many data points can these memories hold? In other words, how
many frequencies per band per antenna can it hold?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
