The AUXBUS protocol is Elecraft proprietary and is not published.
It is the single wire communications between the K3 and its options,
both internal and external.
The K3 Programmers Reference and KPA500 Programmers Reference gives you
commands that can be issued from a PC or other connected computer -
those commands are quite extensive and can give you complete control
from a PC.
73,
Don W3FPR
From: [email protected] [[email protected]] on
behalf of ANDY DURBIN [[email protected]]
Sent: Sunday, April 29, 2018 3:59 PM
To: [email protected]
Subject: [Elecraft] KPA500/K3 AUX bus specification
Can someone please point me to a definition or specification for the KPA500 -
K3 AUX Bus. I have the KPA500 Programmer's Reference but this appears to only
cover the KPA500 - PC interface.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
