That sounds liks fun John.
My next project is to try /PM with the KX1.
Not quite as exciting but I worked VK9LNO last night with the KX1 and a longwire on 30 mtrs. running about 3 watts.
I'm still amazed by the little rig!

73

Tony W7GO


----- Original Message ----- From: "n0evh" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, May 11, 2006 2:08 PM
Subject: [Elecraft] KX1 Mojo /PM


It started in FYBO 2004. I worked Paul W0RW in a snow pile in CO from my snow pile in MO and later found out he was /PM. What started? My thinking that someday I needed to stick a whip in my back pocket and try not to electrocute
myself.  Then I was running my K2, but now my KX1 is begging to go /PM.

Last night I finally got around to it. Hustler whip in back pocket. KX1 on AA
batts running full out at 2 watts.  Sixteen foot drag wire and looking for
signals on 20. Dog Josey standing by just in case I saw a bear. You know I've
heard they like /PM hams.

ATU tunes the hustler 1 to 1. Only one strong signal and he was chewing the rag on 14059. Was afraid that the band would die. Move up 1 kc and play memory one three times. Low and behold Chris comes back on 14.060 from PA. An 800 mile /PM QSO MO to PA on 2 watts /PM! And of course Chris was running his KX1, what
else?

Can't explain the mojo. Did someone say we were at the bottom of the cycle?

John N0EVH (Every volt helps)
See you all at Dayton



_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com



_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to