I'll try that, but I suspect the delay in switching the ATU will
persist. I'd like the option to turn off that delay, so the beginning
of my call isn't cut off.
73,
Scott K9MA
On 5/22/2018 07:13, Buck wrote:
After you've trained the ATU, switch it to manual mode
k4ia, Buck
K3# 101
Honor Roll 8B DXCC
EasyWayHamBooks.com
On 5/21/2018 11:43 PM, K9MA wrote:
After "training" the ATU across part of the band and, I think,
setting up the K3 so it should track, I notice some strange
behavior. As I tune to a different segment of the band, and stop,
there's a delay or a second or so before the ATU relays switch. Other
times, even though it's already been tuned to the new frequency, it
doesn't switch until transmission starts which, of course, garbles
the first character. Am I doing something wrong, or have others
notice this behavior? I assumed that once the ATU has been tuned to
each band segment, it would switch as soon as the K3 was tuned to a
new segment (if necessary), so it would be ready to go when
transmission starts.
73,
Scott K9MA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Scott K9MA
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
