There is no real disadvantage, other than the fact that the base K2 must
work into a 50 ohm load for proper power control and proper PA loading.
For that reason, I would suggest the KAT2 be the first of those options
that you add.
73,
Don W3FPR
On 5/24/2018 2:44 PM, AE0MM via Elecraft wrote:
I'm planning to build a K2/10 with the following options:
KNB2
KAT2
KAF2
Is there any disadvantage to building the base K2, then adding the options
later?
Thanks,
--ae0mm
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
