Thanks all for the advice. I'm going to build the base K2 first. I'll just have to use resonant antennas or the kxpa100 w/internal tuner until the KAT2 has been added.
--ae0mm ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On May 24, 2018 3:27 PM, Don Wilhelm <[email protected]> wrote: > > > There is no real disadvantage, other than the fact that the base K2 must > > work into a 50 ohm load for proper power control and proper PA loading. > > For that reason, I would suggest the KAT2 be the first of those options > > that you add. > > 73, > > Don W3FPR > > On 5/24/2018 2:44 PM, AE0MM via Elecraft wrote: > > > I'm planning to build a K2/10 with the following options: > > > > KNB2 > > > > KAT2 > > > > KAF2 > > > > Is there any disadvantage to building the base K2, then adding the options > > later? > > > > Thanks, > > > > --ae0mm > > > > Elecraft mailing list > > > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/mmfaq.htm > > > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > > > Please help support this email list: http://www.qsl.net/donate.html > > > > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
