Don,
ok, thank you. That clarifies the issue. Would be nice to hear from the
Elecrafters if there are any firmware changes possible to improve the
IF-message timing.
If not: I already had the idea to implement a frequency counter which
measures the VFO's frequency, connects to the RS-232 output and combines
the two into a super-responsive frequency status message generator :-)
Anybody interested? Then maybe I'll give it a try.
73 Gernot DF5RF
Am 31.05.2018 um 23:12 schrieb Don Wilhelm:
Gernot,
The USB interface will not change anything unless your computer
changes something at its end.
Realize that the K3S or K3 with the USB interface still runs
internally with RS-232. The USB interface simply moves the FTDI
adapter chip inside the K3/K3S. You still have to identify the COM
port that is assigned by the computer to your software applications.
Oh yes, a soundcard chip is also added.
73,
Don W3FPR
On 5/31/2018 4:58 PM, [email protected] wrote:
Hi all,
at the WinTest-reflector people asked why the K3 does not appear
"smooth" in the band map as another vendor's TRX.
I made some tests and found out the following, see below.
Now my question: will the new USB-Interface change that timing behavior?
tnx, 73, Gernot DF5RF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
