Thanks very helpful. I just found the problem it was that the batteries were quite discharged and my charger PSU was a touch low in voltage. Seems OK now. 73 and thanks again Bob G3PJT
Sent by Ipad > On 31 May 2018, at 22:06, Don Wilhelm <[email protected]> wrote: > > Bob, > > Read the BAT ERR description on page 4 of the KXBC3 manual. > > You may have to remove the batteries and check the terminal voltage of each > one with your DMM to determine if you have a bad one, or if all are possibly > fully charged. > > Reloading software will not make any difference, but likely will not hurt > anything either. > > 73, > Don W3FPR > >> On 5/31/2018 4:51 PM, Bob G3PJT wrote: >> When I try to charge the battery I get Bat err message and charging is >> terminated. I have reloaded s/ware etc but no change. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
