I’m confused. If you’re in the “field”, are you keying a high power amp with relay T/R switching?? Is it possible the problem is associated with the way your computer software keys the K3? Have you tested “all other rigs”? Perhaps it’s a “system” issue? How does your system behave when keying the K3 directly— e.g., no computer, just a key — manual or internal keyer.
Grant NQ5T K3 #2091, KX3 #8342 > On Jun 8, 2018, at 3:37 PM, Igor Sokolov <[email protected]> wrote: > > Dear Bob, > > My setup is optimized for traveling/field operation. I do not need > additional boxes in the form of Winkey or external QSK. I use external keying > from computer through USB-COM adapter. The logger that does CW keying is > TR4W. No keying compensation helps to achieve correct CW weight if TX Delay > in K3 is set to say 20ms and CW speed used is above 30WPM. Dependency of CW > weight from TX Delay is only inherent in K3. All other rigs do not have this > dependency. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
