If switching from “MIC BTN” to “PTT” fixes the problem, then it must be related to the way firmware reads the mic buttons. it could be that we need to tweak the A-to-D thresholds a bit.
Anyone who has this issue could use the “PTT” setting as a work-around, assuming they don’t require the UP/DN functions. Thanks, Wayne N6KR > On Jun 13, 2018, at 11:22 AM, AE7AP <[email protected]> wrote: > > I used to have this issue (KX3) - I don't recall if it went up or down (I > think down). I assumed that I was inadvertently pushing the microphone > buttons & subsequently switched the "MIC BTN" menu item to "PTT". I have > not had the problem occur again. > > 73, > Rob - AE7AP > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
