No issues here with the K3S and WSJT-X in Hound mode. I do use CAT
control for PTT and not VOX. SPLIT works just fine with no observed
delays. It may be enhanced by the fact that I'm not running any other
applications, logging or such while working FT-8. Logging is handled
separately by a different application, somewhat manual, and is not
connected to the radio or WSJT-X software.
73
Bob, K4TAX
On 6/29/2018 12:44 PM, Wes Stewart wrote:
Do you have the same mode selected for both VFOs? Give the A -> B a
double tap to be sure. Understand that in Hound mode you need to set
your TX frequency above 1000 Hz. If the Fox calls you he will move
your TX down to his frequency.
I'm still experiencing a TX delay, which I think is WSJT commanding
the K3 to go Split and then waiting for confirmation. This has been
discussed before. Also, I use VOX and we still don't have VOX
settings remembered by mode, so there is constant fiddling to get the
VOX to activate.
Wes N7WS
On 6/29/2018 9:46 AM, K1RI wrote:
I too run split FT8 Data A. I cannot get the K3 to transmit in the WSJT
DXPedition Hound. What am I missing? My IC-7610 works great and I
would run
a comparison.
Tnx, Bob K1RI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
